Output Power 160W per channel into 8 Ohms 300W per channel into 4 Ohms 500W peak per channel into 2 Ohms Voltage 36 Volts RMS (20Hz - 20 kHz) onset of clipping 147 Volts peak to peak Current 50 Amps peak to peak Damping factor 100 Output devices 2 pairs per channel
Line input THD+N < 0.005 % typical, 20Hz to 20 kHz Signal / noise ratio > 107dB ‘A’-weighted Input impedance 100 k Ohms Frequency response + 0, –0.1dB, 10Hz to 30 kHz
Connections Line level inputs 4 pairs line level RCA connectors 2 pair line level balanced XLR connectors Line level outputs 1 pair line level RCA connectors, constant level LINE outputs 1 pair line level RCA connectors, PREAMP outputs for e.g. biamping Speaker outputs 2 pairs 4mm banana plug/binding posts
Power requirement Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative) Consumption <0.5W in standby mode (orange LED lit) 75W on and idle (blue LED lit) 600W maximum
Weight Unit only, unboxed 36 kg in shipping carton 44.3 kg
Maximum Dimensions Wide 483 mm Height on standard flat feet 187 mm Height on pointed feet 212 mm Deep (front to back) including terminals 510 mm
