Output Power 330W per channel into 8 Ohms 500W per channel into 4 Ohms 1000W peak per channel into 2 Ohms Voltage 52 Volts RMS (20Hz - 20 kHz) onset of clipping 147 Volts peak to peak Current 120 Amps peak to peak Damping factor 200 Output devices 5 pairs per channel
Line input THD+N < 0.005 % typical, 20Hz to 20 kHz Signal / noise ratio > 107dB ‘A’-weighted Input impedance 40 k Ohms Frequency response + 0, –0.1dB, 10Hz to 30 kHz
Connections Line level inputs 4 pairs line level RCA connectors 1 pair line level balanced XLR connectors Line level outputs 1 pair line level RCA connectors, constant level LINE outputs 1 pair line level RCA connectors, PREAMP outputs for e.g. biamping Speaker outputs 2 pairs 4mm banana plug/binding posts
Power requirement Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative) Consumption <0.5W in standby mode (orange LED lit) 130W on and idle (blue LED lit) 900W maximum
Weight Unit only, unboxed 41 kg in shipping carton 49 kg
Maximum Dimensions Wide 483 mm Height on standard flat feet 187 mm Height on pointed feet 212 mm Deep (front to back) including terminals 510 mm
Standard accessories IEC type mains lead 10-Amp type Remote control Nu-Vista 800.2 remote Batteries LR03 or AAA, manganese alkaline type 2 off Felt pads 4 off Spike Foot 4 off Spike Foot Cups 4 off Remote Feet 4 off
